07-04-2019, 12:56 PM
I have been to the workshop and the ceramic nozzle is lableld 6mm but measures to 6.5mm so not too worn but perhaps too big for my 3hp compressor with its 150 L tank.
Running with the 2 compressors in tandem they should have a combined 6hp and 250 L tank capacity. I suspect the 6.5mm nozzle will still be too large for high velocity garnet flow.
The web site suggested does have an interesting table of pressure, HP, and nozzle size. I will experiment and report back, probably in a week due to workload . Thanks for your input, Russell
Running with the 2 compressors in tandem they should have a combined 6hp and 250 L tank capacity. I suspect the 6.5mm nozzle will still be too large for high velocity garnet flow.
The web site suggested does have an interesting table of pressure, HP, and nozzle size. I will experiment and report back, probably in a week due to workload . Thanks for your input, Russell