04-04-2019, 10:28 PM
(This post was last modified: 04-04-2019, 10:29 PM by Tony Press.)
The front angular contact bearings are unlikely to turn in the alloy housing so no Loctite needed.
If as appears the two angular contact bearings have narrow outer rings in a deep housing then you must fit a 30 thou outer ring spacer front and back to correctly locate the crankshaft.
If as appears the two angular contact bearings have narrow outer rings in a deep housing then you must fit a 30 thou outer ring spacer front and back to correctly locate the crankshaft.