25-03-2019, 08:37 PM
One of the standard problem with a poor earth on indicators is that it can cause alternate flashing of the opposite indicator or flashing of brake lights etc as the power seeks a route out to earth.
This won't show itself in brake or tail lights as both are in operation.
If you have a common earth could it be just poor enough to not actually be earthing at all and actually be providing a straight power supply to the other aide and then earthing out through the opposite indicator?
So, just try a new earth point to ensure it is a good earth and perhaps separate the earths.
Andy B
This won't show itself in brake or tail lights as both are in operation.
If you have a common earth could it be just poor enough to not actually be earthing at all and actually be providing a straight power supply to the other aide and then earthing out through the opposite indicator?
So, just try a new earth point to ensure it is a good earth and perhaps separate the earths.
Andy B
Enjoy yourself, it's later than you think!