08-05-2019, 09:41 AM
I would make a trial cover in the heaviest material you dare to use on your home machine.
Even if that is just an old sheet you will learn a lot.
If you really really don't have access to a machine you can use glue or pins to replicate seams.
You can use real fasteners, and think not twice but three times before deciding the final position of the ones attached to the car.
You cannot easily un-drill a hole.
And often people use many fasteners when half the number will do.
My Cambridge tonneau has just four.
Even if that is just an old sheet you will learn a lot.
If you really really don't have access to a machine you can use glue or pins to replicate seams.
You can use real fasteners, and think not twice but three times before deciding the final position of the ones attached to the car.
You cannot easily un-drill a hole.
And often people use many fasteners when half the number will do.
My Cambridge tonneau has just four.