When I first started working on my 3D printed Enigma machine I didn't have any blueprints to work from so used photos. I modified some cheap digital calipers by adding an Arduino microcontroller and a small OLED screen. You enter in a scaling factor then measure from the drawing with the calipers and the little screen will show you the scaled measurement. They work very well but I never got past the breadboard stage since I came across some proper scaled blueprints I could use. A project to go back to one day. Pity the idea was already patented!
![[Image: main.php?g2_view=core.DownloadItem&g2_it...alNumber=1]](http://www.asciimation.co.nz/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=10009&g2_serialNumber=1)
Simon
This guys DVD is very good. No fancy tools required.
[video=youtube] https://www.youtube.com/watch?v=IGElSHzm0q8[/video]
I found it well worth the money. Even if you never try anything just watching how good he is at doing it was interesting.
Simon
Simon
This guys DVD is very good. No fancy tools required.
[video=youtube] https://www.youtube.com/watch?v=IGElSHzm0q8[/video]
I found it well worth the money. Even if you never try anything just watching how good he is at doing it was interesting.
Simon