To correct myself early crankcase are 'undercut' around the inside and as such the sump bolts are not in blind holes (at least not all of them). Later crankcases don't appear to be undercut in the same way and as such appear to be blind holes (at least for the most part). Sorry I can't pinpoint when the change was. Further correction of course welcome.
|
Sump gasket
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Sump gasket - by Tiger - 27-10-2018, 02:27 PM
RE: Sump gasket - by rubyman - 27-10-2018, 02:58 PM
RE: Sump gasket - by Zetomagneto - 27-10-2018, 03:05 PM
RE: Sump gasket - by Steve Bryant - 27-10-2018, 03:07 PM
RE: Sump gasket - by Ruairidh Dunford - 27-10-2018, 04:00 PM
RE: Sump gasket - by bob46320 - 27-10-2018, 04:06 PM
RE: Sump gasket - by John Raeburn - 27-10-2018, 04:08 PM
RE: Sump gasket - by Tiger - 27-10-2018, 05:36 PM
RE: Sump gasket - by John Raeburn - 28-10-2018, 06:44 AM
RE: Sump gasket - by Steve Bryant - 28-10-2018, 12:44 AM
RE: Sump gasket - by Bob Culver - 28-10-2018, 09:26 AM
RE: Sump gasket - by Tiger - 30-10-2018, 08:01 AM
RE: Sump gasket - by Bob Culver - 30-10-2018, 06:36 PM
RE: Sump gasket - by Timothy P - 31-10-2018, 12:53 PM
RE: Sump gasket - by Timothy P - 31-10-2018, 09:48 PM
RE: Sump gasket - by Bob Culver - 01-11-2018, 02:04 AM
RE: Sump gasket - by Tiger - 01-11-2018, 07:48 AM
RE: Sump gasket - by Zetomagneto - 01-11-2018, 08:50 AM
|
Users browsing this thread: 1 Guest(s)