The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
manifold removal - stuck on oversize stud
#32
Yes there are at least 2 leaks - one from the hose connection / manifold above the head and one in the gasket most likely around the water passage between 2nd & 3rd cylinder I suggest. This is not unusual after rebuild even with fresh gaskets - it normally takes me a few runs and a bit of re-tightening here and there to stem all the dribbles. If you haven't got to that stage yet it may be better to drain down before leaving the car for long.

Jon, how are you judging there is no water in the oil?
In theory it should settle to the bottom around the drain plug, I would gently loosen this and see if any water comes out.
Reply


Messages In This Thread
RE: manifold removal - stuck on oversize stud - by Chris KC - 27-12-2018, 05:24 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)