17-09-2018, 08:01 AM
Steve, as Stuart and Tony have said, the A/C bearings should be a matched pair ground to size.
The large ring nut when fully tightened should give the outer races of the A/C pair 0.001-0.002" end clearance within the housing - ref A7 Companion p.156 (Austin Service Journal March/April 1932).
The large ring nut when fully tightened should give the outer races of the A/C pair 0.001-0.002" end clearance within the housing - ref A7 Companion p.156 (Austin Service Journal March/April 1932).