29-08-2018, 08:44 PM
Hi,
I often assemble the clutch with the clamp bolts loose enough to move the plate around but just nipped.
You can turn the output flange with gear engaged and wiggle things about and rotate till things line up.
Once all is in accord put a couple of nuts to hold the box to the engine then rotate the flywheel and tighten up the cover plate bolts.
Result a self aligning A7 clutch.
I often assemble the clutch with the clamp bolts loose enough to move the plate around but just nipped.
You can turn the output flange with gear engaged and wiggle things about and rotate till things line up.
Once all is in accord put a couple of nuts to hold the box to the engine then rotate the flywheel and tighten up the cover plate bolts.
Result a self aligning A7 clutch.