18-06-2018, 09:55 PM
Hello Simon,
My AH tourer's hood peak is a recent and precise copy of the original one. It is 44'' x 4'' with an overall thickness of 1.5'' at the back and curving down to 0.75'' at the front and sides (ends). I say 'overall thickness' because, like the original, it is scooped out down to only 1'' thick at the back. Most replacement peaks that I have seen have been left 'solid', i.e. not routed out (scooped).
Note that the overhang, measured from the centre of the windscreen pegs to the front of the peak is 3.25''.
Mick
My AH tourer's hood peak is a recent and precise copy of the original one. It is 44'' x 4'' with an overall thickness of 1.5'' at the back and curving down to 0.75'' at the front and sides (ends). I say 'overall thickness' because, like the original, it is scooped out down to only 1'' thick at the back. Most replacement peaks that I have seen have been left 'solid', i.e. not routed out (scooped).
Note that the overhang, measured from the centre of the windscreen pegs to the front of the peak is 3.25''.
Mick