10-06-2018, 04:57 PM
Hello Chris
That is uncanny. I just came back in from the garage having re torqued all of the nuts to 20 lb and every one of them took at least an 1/8 of a turn so presumably it needed a bit more of a run than I initially gave it to bed the gasket in. And then I read your post. I must have read your mind also.
Anyway, I shall do as you say and monitor the offending nut and see what happens and hopefully all will be well.
If not I will be back for even more advice.
Many thanks to you both
Graham.
That is uncanny. I just came back in from the garage having re torqued all of the nuts to 20 lb and every one of them took at least an 1/8 of a turn so presumably it needed a bit more of a run than I initially gave it to bed the gasket in. And then I read your post. I must have read your mind also.
Anyway, I shall do as you say and monitor the offending nut and see what happens and hopefully all will be well.
If not I will be back for even more advice.
Many thanks to you both
Graham.