07-05-2018, 07:09 PM
(07-05-2018, 05:51 PM)Stuart Giles Wrote: The lever at the bottom of your steering column should have a rod connected to another lever which is fitted on the cross shaft. There is a type of dog clutch arrangement with this lever which allows you to increase the throttle opening with the pedal and come back to the previous hand throttle setting.
All levers are connected as they should be. When I move the hand throttle the lever on the bottom of the column pushes the rod connected to the lever on the cross shaft. But it is turning without turning the cross shaft. It appears that the lever is not attached to the cross shaft. Is it secured by a pin or a key? Can’t find a drawing in any of my books.