25-04-2018, 06:54 PM
I have dressed damage like yours with a file first then oilstone slips, remove all the jagged sharp corners and grain showing , usually the damage is either from something hitting the teeth during fitting / removal.
You can have a new front bearing made and change to a modified standard camshaft, The rear bearing is the same diameter as is the centre bearing which needs sports rollers as the outer race on the Nippy / 65 is larger.
Your other option is to have a standard timing gear re bored to suit the Nippy Cam.
It depends on whether you are after a quick fix or a major stripdown.
Can you do the work or does it cost you money !
I have just checked my Type 65 cam against a standard one.
Good Luck Richard
You can have a new front bearing made and change to a modified standard camshaft, The rear bearing is the same diameter as is the centre bearing which needs sports rollers as the outer race on the Nippy / 65 is larger.
Your other option is to have a standard timing gear re bored to suit the Nippy Cam.
It depends on whether you are after a quick fix or a major stripdown.
Can you do the work or does it cost you money !
I have just checked my Type 65 cam against a standard one.
Good Luck Richard