27-12-2022, 01:47 PM
Hi all
I am after a bit of sagely advice.
I need to remove my rear hubs to replace the brake spindles and oil light bearings.
The drive shaft nut came off with very little effort, but the treads on the hub are stripped and not savable .
I tried my hub puller on it, but it wouldn't bite the remains of the threads.
Any advice before i resort to heat and extreme violence !
I am after a bit of sagely advice.
I need to remove my rear hubs to replace the brake spindles and oil light bearings.
The drive shaft nut came off with very little effort, but the treads on the hub are stripped and not savable .
I tried my hub puller on it, but it wouldn't bite the remains of the threads.
Any advice before i resort to heat and extreme violence !