22-02-2018, 03:11 AM
Ruairidh, I couldn't find my Hermatite Gold. I do have two new taps, in the correct sizes. One is the lever type but with a copper wire mesh screen to fit up into the tank. I opted for this thinking that it will filter out anything that is in the tank that could clog the jets. The other is the push pull type. This latter has a knurled knob on one side and a hex on the other so to tell which is which by feel. Does anyone have experience with these? I realize that the lever type are potentially more positive. However, in my case, the tap is very near the firewall and the lever ends up on the firewall side of the tap so is more difficult to reach and operate.
Erich in cold snowy Seattle hoping to finish insulating my garage and be done with itching from all the glass fibers.
Erich in cold snowy Seattle hoping to finish insulating my garage and be done with itching from all the glass fibers.