26-07-2021, 09:10 AM
(This post was last modified: 26-07-2021, 09:11 AM by Mike Costigan.)
Fasteners around the back = the press-studs across the back panel.
I assume the back panel containing the rear window will be hanging loose so once you've folded the main bulk of the hood, so this will then need to be folded/rolled forward over the rest of the folded material.
I assume the back panel containing the rear window will be hanging loose so once you've folded the main bulk of the hood, so this will then need to be folded/rolled forward over the rest of the folded material.