11-05-2021, 07:18 PM
Malcolm my s/seater is using a H4 SU but had the same float chamber fuel height problems, so I remote mounted it,I also put a spacer between the bottom feed fitting and the carb body as when it was hot it dripped fuel from the intake which the startline marshals thought was a fuel leak. I set the fuel height up on the bench with the carb fitted on a spare inlet manifold fed by a test tank so when the choke is operated petrol just flows over top of the jet when it is set 8 flats down from the bridge, the chamber level set to standard fuel level height.
Hope this helps you setup. Terry.
Don't know why the site turns some photo round.
Hope this helps you setup. Terry.
Don't know why the site turns some photo round.