06-05-2021, 09:26 AM
A few months ago there was a debate on best head gasket sealant— locktite 5920 RTV Copper Silicone gasket maker was recommended by several people. I made a note of this, knowing that a gasket change was due on my 1937 Opal. So I got a tube of the aforementioned and yesterday happily did the job.
My slight reservation is the note on the packaging which says, “ not recommended for use on head gaskets or parts continuously immersed in gasoline “
I’ve use it sparingly and spread a thin coat over the C&A gasket and torqued the head down at a bit under 20lbs — the instructions say re torquing is unnecessary.
I suppose what I’m looking for is some reassurance that I’ve used the right stuff!
Charles
My slight reservation is the note on the packaging which says, “ not recommended for use on head gaskets or parts continuously immersed in gasoline “
I’ve use it sparingly and spread a thin coat over the C&A gasket and torqued the head down at a bit under 20lbs — the instructions say re torquing is unnecessary.
I suppose what I’m looking for is some reassurance that I’ve used the right stuff!
Charles