22-03-2021, 10:36 AM
I need to bend a standard 4 speed lever a tad in its mid/upper section to clear dash 'tap' on selecting 1st.
Will a bbq aerosol gas torch be enough to heat it, and what must I do for cooling - just bend in situ as it gets dull red, and then let cool naturally?, or will I need to adopt more stringent measures to stop it flopping?
I don't want to muck anything up...!
Will a bbq aerosol gas torch be enough to heat it, and what must I do for cooling - just bend in situ as it gets dull red, and then let cool naturally?, or will I need to adopt more stringent measures to stop it flopping?
I don't want to muck anything up...!