09-02-2021, 12:03 PM
Most I imagine would suggest old stock Nitromors paint remover using a wood scraper made from a kitchen spatula to save damaging the ally.
The risk is how much damage and filler you run into along the way, which is why I would carefully take the paint back with a DA sander...a long, dusty and laborious job, particularly around any swage lines and mouldings.
I bet you ten bob that half way through the job you’ll say “sod it, let’s paint it!”
Good luck!
The risk is how much damage and filler you run into along the way, which is why I would carefully take the paint back with a DA sander...a long, dusty and laborious job, particularly around any swage lines and mouldings.
I bet you ten bob that half way through the job you’ll say “sod it, let’s paint it!”
Good luck!