14-11-2020, 09:55 AM
Just to back up Howard:
The movement in the Carden sounds correct.
It is a simple matter to undo the 4 bolts that hold the Carden pot to the torque tube flange, and then slide it up the propshaft.
One way of taking up the play in a sloppy carden is to fit an "O" ring under each block.
Gets rid of the vibration whilst you drive about looking for a less worn housing.
The movement in the Carden sounds correct.
It is a simple matter to undo the 4 bolts that hold the Carden pot to the torque tube flange, and then slide it up the propshaft.
One way of taking up the play in a sloppy carden is to fit an "O" ring under each block.
Gets rid of the vibration whilst you drive about looking for a less worn housing.