08-09-2020, 09:49 AM
I use the simple system as mentioned by Bob.
Driving the car only a short distance is enough to mark high areas on the linings clearly. It only take a few minutes to remove the drum and file off all the rubbed area.
Repeating this 2 or 3 times results in the linings bearing evenly over the whole face.
It is essential to have good drums otherwise the brakes will never be good.
Driving the car only a short distance is enough to mark high areas on the linings clearly. It only take a few minutes to remove the drum and file off all the rubbed area.
Repeating this 2 or 3 times results in the linings bearing evenly over the whole face.
It is essential to have good drums otherwise the brakes will never be good.
Jim