15-08-2020, 05:17 AM
(This post was last modified: 15-08-2020, 05:27 AM by Mark McKibbin.)
I have got to the part of the engine rebuild where I wanted to check that the oil jets do point at the crank, so while looking around the shed I had in mind something like a cat litter tray to hold the diesel and then I saw the paint roller tray. Quite frankly the designer must have had an Austin 7 engine in mind as the reservoir is only at the oil pump end so less diesel needed, it has a spout on one corner and it's just the right size.
It was worthwhile as the jets missed the crank holes by an inch.
It was worthwhile as the jets missed the crank holes by an inch.
Cheers
Mark
Mark