27-08-2020, 01:04 PM
IMG_3762.JPG (Size: 48.85 KB / Downloads: 82)
IMG_3761.JPG (Size: 27.41 KB / Downloads: 82)
ex1.jpg (Size: 73.62 KB / Downloads: 82) For reference: I sorted this by machining a 3mm wedge in a steel flange (placed between the exhaust manifold and downpipe). The result is a 7mm gap at the chassis rail. (see photos) I have not yet ascertained whether this has made the car any quieter but I think it will allow more flex in the engine on itsĀ mountings rather than in the crankcase. It is a 3 bearing engine, so should give more compliance with the loreĀ that a rigidly fixed engine is a bad thing.
Ian