03-08-2020, 10:06 AM
Hi,
My Ulsteroid has a C35M dynamo and what I believe is a CF3 cut-out.
Neither the dynamo, cut out or switch panel incorporate a ½ charge resistor so at present I only get any charge in the winter position.
I’ve seen various suggestions of winding an open coil of resistance wire and attaching it between the dynamo terminals but it’s all a bit vague and having an exposed coil sound a bit vulnerable especially if it's not wound on a core.
Is there a proprietary wire wound resistor I could use and what sort of resistance / current capacity would I need?
Any suggestions would be much appreciated.
John.
My Ulsteroid has a C35M dynamo and what I believe is a CF3 cut-out.
Neither the dynamo, cut out or switch panel incorporate a ½ charge resistor so at present I only get any charge in the winter position.
I’ve seen various suggestions of winding an open coil of resistance wire and attaching it between the dynamo terminals but it’s all a bit vague and having an exposed coil sound a bit vulnerable especially if it's not wound on a core.
Is there a proprietary wire wound resistor I could use and what sort of resistance / current capacity would I need?
Any suggestions would be much appreciated.
John.