09-07-2020, 10:06 PM
Hi Dave
I can get to all the bolts but the one under the fan pully needs a short ring spanner and lots of patience. I've remodelled the flitch plate to accommodate the drag link three times now!
I think the front ends (bowed and straight) will include everything including wheels. In that way you can push it under the car and drop the chassis onto the spring then lift the radius arms to fit the ball bolt. I've assembled a straight axle, swivels, hubs, brakes and already its just too heavy to lug around.
Good luck!
Cheers
Howard
I can get to all the bolts but the one under the fan pully needs a short ring spanner and lots of patience. I've remodelled the flitch plate to accommodate the drag link three times now!
I think the front ends (bowed and straight) will include everything including wheels. In that way you can push it under the car and drop the chassis onto the spring then lift the radius arms to fit the ball bolt. I've assembled a straight axle, swivels, hubs, brakes and already its just too heavy to lug around.
Good luck!
Cheers
Howard