26-03-2020, 12:41 PM
Based on my RP, running over the top of the wheel arch, close up to the side of the body, should be a strip of ply, maybe an inch wide (from memory) that the trim can be tacked to. That is held in place on the wheel arch by the bifurcated rivets. The tacked area is then concealed by way of the interior vertical trim side panel that houses the window. There is another small piece of ply at the base of the wheel arch at the front to tack the bottom of the trim to. Originally the trim was leather cloth with (again, if I recall correctly) a little bit of horse hair beneath it...
hth...
hth...