25-03-2020, 09:55 AM
I am replacing the trim boards on the sides of in the footwell of my AG tourer. None with the car. I have made the boards and covered them -including the opening air vents! On the door A posts there are tabs with 3/16 holes clearly for attaching the boards (I cannot see any tabs or holes further forward ? Are there?)
The question is how is the board fixed to the tab? In 1932 there were no self tappers, so no edge clips to take a tapper, a nut cannot be held in place & rivnuts were not yet invented!
The only thing I can think of is to put a strip of wood down the inside of the A post.behind the tabs...which still leaves the question of how to fix the panel further forward
The question is how is the board fixed to the tab? In 1932 there were no self tappers, so no edge clips to take a tapper, a nut cannot be held in place & rivnuts were not yet invented!
The only thing I can think of is to put a strip of wood down the inside of the A post.behind the tabs...which still leaves the question of how to fix the panel further forward