Guys, I need some help.
I recently came across a set of 4 cast iron pistons. They are slightly bigger than A7 pistons but they carry a scripted "Austin" logo on the top and the part number 1A1934.
Dimensions are as follows:
Diameter: 2.2635, oval, split skirt, down to 2.2632 (on the skirt)
Rings: 2 compression, 3/32", 1 oil control, 1/8"
Gudgeon pin: 1/2" dia.
Height of crown above gudgeon pin: 1 1/4"
I was going to put these on FleaBay but I (unlike many sellers it seems), like to know exactly what it is that I'm supposed to be selling!
Can anyone help by identifying them? They're not Big 7 (unless oversize) and probably came from and industrial engine I should think.
Regards
Tim Reynolds
I recently came across a set of 4 cast iron pistons. They are slightly bigger than A7 pistons but they carry a scripted "Austin" logo on the top and the part number 1A1934.
Dimensions are as follows:
Diameter: 2.2635, oval, split skirt, down to 2.2632 (on the skirt)
Rings: 2 compression, 3/32", 1 oil control, 1/8"
Gudgeon pin: 1/2" dia.
Height of crown above gudgeon pin: 1 1/4"
I was going to put these on FleaBay but I (unlike many sellers it seems), like to know exactly what it is that I'm supposed to be selling!
Can anyone help by identifying them? They're not Big 7 (unless oversize) and probably came from and industrial engine I should think.
Regards
Tim Reynolds