22-10-2017, 09:41 PM
Jon,
Be cautious if you replace the balls and springs - I bought some recently and they were 5 thou too big. They would push into the slots in the selector rods, just, but were far too tight. I needed pliers to remove them. Maybe they varied from year to year, I'm not sure.
I had a 4-speed box rebuilt some years ago and it jams in gear, I suspect it's the same cause.
Peter.
Be cautious if you replace the balls and springs - I bought some recently and they were 5 thou too big. They would push into the slots in the selector rods, just, but were far too tight. I needed pliers to remove them. Maybe they varied from year to year, I'm not sure.
I had a 4-speed box rebuilt some years ago and it jams in gear, I suspect it's the same cause.
Peter.