25-11-2019, 01:40 PM
Thank you for the reference to the old forum posts.
On looking at the seal and bearing holder I think a modern seal can be used as long as the outside diameter is a tight fit in the bearing holder and the flywheel has a suitably sized collar designed to provide the sealing surface for the inner lip. I am going to look at what can be obtained for a suitable oil seal and go from there. Will keep you posted on how this works out.
Stephen
On looking at the seal and bearing holder I think a modern seal can be used as long as the outside diameter is a tight fit in the bearing holder and the flywheel has a suitably sized collar designed to provide the sealing surface for the inner lip. I am going to look at what can be obtained for a suitable oil seal and go from there. Will keep you posted on how this works out.
Stephen