09-11-2019, 08:40 AM
(This post was last modified: 09-11-2019, 08:41 AM by Colin Swinbourne.)
If you have the threaded cap, a competent machinist will be able to determine the thread size and machine a new threaded section to fit (whilst taking the obvious precautions!)to the tank.
I’ve just had to do this with my Delage- had the cap, but not the thread to screw it on to so had a new piece turned up...and then had to make the rest of the tank for that to fit to!!
I’ve just had to do this with my Delage- had the cap, but not the thread to screw it on to so had a new piece turned up...and then had to make the rest of the tank for that to fit to!!