26-04-2018, 08:11 PM
Yes, Chris would supply you with the drawing for a small fee. As far as the silencer goes I made my own to original external dimensions but found it very noisy. I took the back off and made a tapered tube from inlet to outlet, fitted some stainless gauze around it and filled the space between tube and silencer can with rockwool or glassfibre. Sounds much nicer. This was with the correct shaped tailpipe and fishtail, albeit the tailpipe was in 1” copper. I gave a work colleague a lift home once, forgetting to warn him about the hot exhaust. He was confused when all his change fell out of his jacket pocket through the burnt pocket lining when he climbed out of the car. He wouldn’t let me pay for the repair. Nice chap.