02-10-2019, 10:47 PM
Spent some time on the wiring.
Dash board, cut out and Dynamo completeĀ
No lights etc yet.
Dynamo was a rebuilt by professional about 7 months ago.
However not getting any charge.
My ignition light has no resistor but is fitted with a 9v 0.3A bulb recommended through theĀ
forum.
I remember that dynamos can loose their residual magnetism after standing.
Car electrics are 6volt as original other than ignition light.
Any ideas
Dash board, cut out and Dynamo completeĀ
No lights etc yet.
Dynamo was a rebuilt by professional about 7 months ago.
However not getting any charge.
My ignition light has no resistor but is fitted with a 9v 0.3A bulb recommended through theĀ
forum.
I remember that dynamos can loose their residual magnetism after standing.
Car electrics are 6volt as original other than ignition light.
Any ideas