05-03-2019, 09:59 AM
John
I had a similar issue which I posted about here http://www.austinsevenfriends.co.uk/foru...458&page=3
My issue was the emulsion block which when lapped into the carb body cured the issue.
See this article http://www.da7c.co.uk/technical_torque_a...ettor.html
HTH
Cheers
Dave
I had a similar issue which I posted about here http://www.austinsevenfriends.co.uk/foru...458&page=3
My issue was the emulsion block which when lapped into the carb body cured the issue.
See this article http://www.da7c.co.uk/technical_torque_a...ettor.html
HTH
Cheers
Dave