01-03-2019, 08:57 PM
(This post was last modified: 01-03-2019, 09:07 PM by John Mason.)
Hi all, I have just now put a new choke spring on the carburettor of my Mk1 Ruby (Zeneth VA26). The choke now works well but I have a problem with the carb. When the engine has warmed up there is a big flat spot from tick over to the engine reving up so much that it cuts out unless the throttle is feathered quite a lot. I have checked the tappets, timing and points and all are correct as I believe they have to be before adjustment to the carb. My question is what do I adjust.
One further point to to eliminate all possibilities I have fresh petrol in the tank.
John Mason.
One further point to to eliminate all possibilities I have fresh petrol in the tank.
John Mason.
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.