20-02-2019, 02:25 PM
David,
Think very, very carefully before securing crankshaft bearings with Loctite.
If there is no sign the bearing has been spinning, I'd leave the shaft alone.
Otherwise I would look at having it built up and reground a thou or two tighter.
It's hard to get a proper purchase on a rear main to remove it if it has a death-grip on the shaft.
Think very, very carefully before securing crankshaft bearings with Loctite.
If there is no sign the bearing has been spinning, I'd leave the shaft alone.
Otherwise I would look at having it built up and reground a thou or two tighter.
It's hard to get a proper purchase on a rear main to remove it if it has a death-grip on the shaft.