08-12-2018, 01:11 PM
I've never done rebores,Well ,only once to 60mm which lasted about 150 miles before the side fell out of one of the bores.But from the people who do they bore slightly undersize and get the cross hatch finish and size by honing.
I do sometimes still screwcut threads by hand as it's easier than trying to stop/reverse the motor each cut.A tip an ex Myford employee and friend gave me.
I do sometimes still screwcut threads by hand as it's easier than trying to stop/reverse the motor each cut.A tip an ex Myford employee and friend gave me.