The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Diaphragm clutch
#14
[attachment=4685 Wrote:ITerrytuned pid='20154' dateline='1543881297']
(03-12-2018, 09:43 PM)dickie65 Wrote: Hi Terry,
Many thanks for sharing this with us all.
Is it any worse than a standard clutch with double springs to use ?

( I already have outer Flywheel  milled to leave 6 posts for standard lightened  clutch cover  1933 flywheel )

Regards and thanks again

Richard

The takeup can be a bit fierce as a diaphragm spring flips over on release and the reverse when engaged which you
don't feel when operated by hydralics. It needs a steady foot when driving through the pits.   Terry.
Here is a cross reference for the QH Terry uses, they can be found on the usual auction site quite cheaply new old stock.


Attached Files Thumbnail(s)
   
Reply


Messages In This Thread
Diaphragm clutch - by Zetomagneto - 30-11-2018, 11:54 PM
RE: Diaphragm clutch - by dickie65 - 01-12-2018, 09:03 PM
RE: Diaphragm clutch - by Zetomagneto - 02-12-2018, 11:14 PM
RE: Diaphragm clutch - by Terrytuned - 02-12-2018, 08:17 PM
RE: Diaphragm clutch - by dickie65 - 02-12-2018, 09:11 PM
RE: Diaphragm clutch - by Terrytuned - 03-12-2018, 12:44 AM
RE: Diaphragm clutch - by Charles P - 03-12-2018, 10:20 AM
RE: Diaphragm clutch - by Zetomagneto - 03-12-2018, 11:50 PM
RE: Diaphragm clutch - by Terrytuned - 03-12-2018, 11:05 AM
RE: Diaphragm clutch - by Charles P - 03-12-2018, 02:24 PM
RE: Diaphragm clutch - by Terrytuned - 03-12-2018, 03:43 PM
RE: Diaphragm clutch - by dickie65 - 03-12-2018, 09:43 PM
RE: Diaphragm clutch - by Terrytuned - 04-12-2018, 12:54 AM
RE: Diaphragm clutch - by Zetomagneto - 06-12-2018, 10:12 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)