Dynamo

[Dave Mann]

  Photo 13 field coils & pole pieces.JPG (Size: 59.67 KB / Downloads: 140)
  Photo 11.jpg (Size: 136.64 KB / Downloads: 139)

Tiger pid='19628' dateline='1542958890']     Thanks Bob.
That’s a big help.
Both my cases have the same fault.
One wire missing from the coils.
I can move forward on this now.
Cheers

---

Any info.on reinsulating and connecing field coils.

I've not managed to do this with the coils in the case, so I remove the pole pieces & coils by using two G clamps to pull the pole pieces into the case keeping them off the coils and undo the pole securing screws with a very good Facom ratchet screwdriver. One of these days I'll make a tool for the job as in the photo, those screws are tight. With the coils removed unsolder the connection between them, before it breaks, then you can clean, repair and re insulate the coils. Or you can buy new coils from Ian Bancroft.

---

Why do the attachments appear in the reverse order to which I selected them?