27-07-2018, 08:16 AM
Do not fix to the shell without cross bracing, it will eventually wreck it.
On "Alice" the shell had been load bearing, and all 4 corners were split from the insides to the start of the curved sections.
I made a very light cross-support, with an inverted "V" down to the chassis, and the shell hasn't moved since.
Put flat section rubber inside and out to stop fretting.
Simon
On "Alice" the shell had been load bearing, and all 4 corners were split from the insides to the start of the curved sections.
I made a very light cross-support, with an inverted "V" down to the chassis, and the shell hasn't moved since.
Put flat section rubber inside and out to stop fretting.
Simon