10-06-2018, 09:43 AM
Hi Colin R, the crown wheel looks ok at first glance (no chipped teeth).
Was looking at get new half shafts and hubs as the existing weren’t on the the tapper very tight and already had washes under he crown nut. (Wasn’t done by me).
Colin W, the nuts weren’t very tight and had split pins.
My question is, is the pinion useable and if not dose anyone in nz have a spare for a screw in torque tube and do you have to replace both the crown wheel and pinion together as a pair?
( sorry if this is a silly question but never done a diff before)
Was looking at get new half shafts and hubs as the existing weren’t on the the tapper very tight and already had washes under he crown nut. (Wasn’t done by me).
Colin W, the nuts weren’t very tight and had split pins.
My question is, is the pinion useable and if not dose anyone in nz have a spare for a screw in torque tube and do you have to replace both the crown wheel and pinion together as a pair?
( sorry if this is a silly question but never done a diff before)