22-10-2023, 12:35 PM
(This post was last modified: 22-10-2023, 12:38 PM by Tony Griffiths.)
OK - I now seem to have something that should work.
The spring I found appears to be OK - on two cars the assembly is OK, but on a third a little weak. I'm still awaiting another sample.
The cost works out at £12.50 for a pusher rod, the screw-in part and a spring which I'll describe as "One set internal parts gas/ignition lever".
I have 12 sets available with more in the pipeline; first orders are limited to two sets per person.
The machinist fits the job in between others to keep the cost down.
I need to separate this from my normal business, so here's how to pay:
Cheques to: Mrs A.Griffiths
Direct bank payment to:
Mrs A Griffiths
NatWest
Account 47407492
Sort Code: 60 01 33
Send a letter with your cheque, or bank transfer details, and your address to
Tony Griffiths
The Channings
Wardlow
BUXTON
Derbyshire
SK17 8RP
Phone: 01298-871633
The spring I found appears to be OK - on two cars the assembly is OK, but on a third a little weak. I'm still awaiting another sample.
The cost works out at £12.50 for a pusher rod, the screw-in part and a spring which I'll describe as "One set internal parts gas/ignition lever".
I have 12 sets available with more in the pipeline; first orders are limited to two sets per person.
The machinist fits the job in between others to keep the cost down.
I need to separate this from my normal business, so here's how to pay:
Cheques to: Mrs A.Griffiths
Direct bank payment to:
Mrs A Griffiths
NatWest
Account 47407492
Sort Code: 60 01 33
Send a letter with your cheque, or bank transfer details, and your address to
Tony Griffiths
The Channings
Wardlow
BUXTON
Derbyshire
SK17 8RP
Phone: 01298-871633