23-05-2022, 01:24 PM
The latest update to this topic: I've now discovered that the carburettor has a crack where the banjo bolt screws in. I really should have noticed it before but in my defence, it's on the manifold side and not immediately visible. Of course, it's also possible the crack is new and was caused by my previous attempts at fixing the problem.
![[Image: Zenith-Crack-out.jpg]](https://tm-img.com/images/2022/05/23/Zenith-Crack-out.jpg)
I have approached a local precision welding company to see if they can assist but so far they haven't responded. Is this another common problem? Does anyone have any suggestions for fixing this or is it time to just go with my earlier plan of fitting an SU?
![[Image: Zenith-Crack-in.jpg]](https://tm-img.com/images/2022/05/23/Zenith-Crack-in.jpg)
![[Image: Zenith-Crack-out.jpg]](https://tm-img.com/images/2022/05/23/Zenith-Crack-out.jpg)
I have approached a local precision welding company to see if they can assist but so far they haven't responded. Is this another common problem? Does anyone have any suggestions for fixing this or is it time to just go with my earlier plan of fitting an SU?