The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.29 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval



Austinsevenfriends › Austin Seven Friends Forum › Forum chat... v
Need help with a half shaft/hub

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Need help with a half shaft/hub
Steve Jones Offline
Pass the hammer
*****
Joined: Aug 2017 Posts: 1,411 Threads: 25
Reputation: 16
Location: North Yorkshire
#2
22-05-2022, 04:54 PM (This post was last modified: 22-05-2022, 04:58 PM by Steve Jones.)
The Hub 'Puller' is, actually, a Half Shaft 'Pusher' and, therefore, it's done exactly what it's designed to do. The hub won't turn because the diff is locked by the action of pushing the half shaft into it. The hub outer should now be removable but is, probably, stuck to the hub inner. A little gentle persuasion between the two should solve the problem but be careful as it is possible to distort the hub flange if you attack the junction of the inner and outer hubs too enthusiastically. In this situation, place a suitable sized nut into the hole in the end of the hub outer, re-fit your puller/pusher and continue to tighten and you should find the two halves of the hub separate.

Steve
Reply


Messages In This Thread
Need help with a half shaft/hub - by Luke.Seddon - 22-05-2022, 04:29 PM
RE: Need help with a half shaft/hub - by Steve Jones - 22-05-2022, 04:54 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)