11-02-2022, 06:50 PM
(This post was last modified: 11-02-2022, 06:55 PM by Austin in the Shed.
Edit Reason: Add content
)
Scrap I'm afraid,even if someone weld it the crankcase will be distorted.
I'm looking at salvaging one now,not a stripped thread on it but a really badly bodged front bearing flange where 5/16 bolts have been fitted to fix the bearings.
From experience bodged sump and strainer,most other threads on the extremities (welding up) but down the sides and top face is trouble.
I bought 3 at 750 Beaulieu for conversion,only one was very good but knew the other 2 were marginal.
I'm looking at salvaging one now,not a stripped thread on it but a really badly bodged front bearing flange where 5/16 bolts have been fitted to fix the bearings.
From experience bodged sump and strainer,most other threads on the extremities (welding up) but down the sides and top face is trouble.
I bought 3 at 750 Beaulieu for conversion,only one was very good but knew the other 2 were marginal.