17-11-2021, 12:03 PM
(This post was last modified: 17-11-2021, 12:04 PM by Chris.Dallas.)
The 1 5/16 crank has wear on the main bearing surfaces so someone has attacked these areas with what looks like a chisel or Mole grips to roughen the surface abs take up wear! Importantly I use the car for trials and lots on the road so purchased a new crank to install. Having suffered a crank breakage in my teens which wrecked the crankcase I have no desire for a repeat. In my view there is only one use for a 90+ year old Austin crank….. that’s on the shelf!
Thank you all I will do some further checking but buy the sounds will need to have them bored or re metalled.
Thank you all I will do some further checking but buy the sounds will need to have them bored or re metalled.