11-02-2018, 11:57 PM
Well the manifolds are off. Inlet pretty full of pips etc, the exhaust had a significant coating of carbon that just flakes off. One corner of the square exhaust flange is chipped, but no sign of leakage. The No 1 exhaust port was half covered by a piece of broken gasket! The exhaust pipe was without a rear mounting! Clunk!
Head nuts & top water manifold nuts all came undone (leaving the studs in place!) no nice fat washers....skinny internal tooth ones! The head is still in place, I'm off for a few days, so it can sit there & dream of freedom!
D
Head nuts & top water manifold nuts all came undone (leaving the studs in place!) no nice fat washers....skinny internal tooth ones! The head is still in place, I'm off for a few days, so it can sit there & dream of freedom!
D