23-11-2020, 10:41 PM
(23-11-2020, 07:21 PM)tomcotez Wrote: They do look nice though! The best mod I have done is to cut off the tubular part of the jet carrier base and solder on a slightly larger diameter well - 10mm id brass tube will just slip over the stump of the old well if you leave a bit to locate it. This gives a slightly larger reservoir of fuel around the jet to be sucked up when you accelerate and made all the difference on mine. The other option is to avoid using the slow jet by driving at full speed all the time.
Harder to do that on a horizontal Solex, but I agree with the thesis.
I do wonder if that's why they increased the size of the threaded base on the jet carrier. My 35MH has the smaller thread and there's simply not enough metal to open it out but later versions (possibly MOH?) are substantially meatier to handle the bigger thread.
C