12-05-2020, 04:07 PM
Hi Bruce,
Many thanks for your input, have looked at your earlier posts which are most interesting but have a some questions regarding your photo of line-up parts of the C35M, the answers to which would be of great help to me.
I/ when slid into the housing does the distance piece extend beyond the housing so giving the oil thrower a bit of a gap forward of the housing
2/ moving along your line of parts there is the washed which has a dimple running around it, does the dimple have the crown towards the bearing or the housing
3/ again to the right of photo. what are seventh & eighth parts first some kind of dished washer the next is it a felt washer (I certainly haven't got either of these parts) if so the size if you have it.
Thanks in advance,
John
Many thanks for your input, have looked at your earlier posts which are most interesting but have a some questions regarding your photo of line-up parts of the C35M, the answers to which would be of great help to me.
I/ when slid into the housing does the distance piece extend beyond the housing so giving the oil thrower a bit of a gap forward of the housing
2/ moving along your line of parts there is the washed which has a dimple running around it, does the dimple have the crown towards the bearing or the housing
3/ again to the right of photo. what are seventh & eighth parts first some kind of dished washer the next is it a felt washer (I certainly haven't got either of these parts) if so the size if you have it.
Thanks in advance,
John